Nippon Dynawave Packaging faces more than US$10.1 million in state workplace safety and environmental penalties following the catastrophic failure of a chemical storage tank at its Longview, Washington, pulp and paper mill on May 26, 2026, which killed 11 workers and injured 12 others. Washington regulators have also announced plans to refer the case to prosecutors for consideration of potential criminal charges.
The Washington State Department of Labor & Industries (L&I) issued 75 workplace safety and health violations carrying US$9,177,127 in penalties, the largest workplace safety penalty in the state's history. Separately, the Department of Ecology imposed US$961,000 in environmental penalties and emergency response cost recovery, bringing the combined amount to US$10,138,127.
According to L&I, Nippon Dynawave continued operating the 1.2-million-gallon G-tank for 43 weeks after receiving a report indicating that its walls were significantly below the minimum safe thickness. The state said the company was aware of the tank's condition at least as early as August 2025 but failed to take appropriate action to protect workers.
The investigation also identified inspection and maintenance deficiencies involving 14 chemical storage tanks, including G-tank. In three tanks where deficiencies had been identified, the company allegedly failed to conduct required fitness-for-service testing before continuing operations. Investigators also identified shortcomings in emergency response planning, training and procedures.
Deadly failure
G-tank ruptured on May 26, releasing approximately 900,000 gallons of hot, highly caustic white liquor used in the pulp-making process. The incident killed 11 employees and injured 12 others.
The U.S. Chemical Safety and Hazard Investigation Board (CSB), in an August 28 preliminary update, reported that a July 2025 external inspection had identified significant portions of the tank's carbon-steel shell below the calculated minimum safe thickness.
The inspection contractor recommended an internal inspection and repairs, warning that the tank was not fit for continued service unless repaired and that there was a high likelihood and consequence of failure.
Two subsequent external inspections, in October 2025 and February 2026, also identified substantial areas below the minimum safe thickness. According to the CSB, the company did not internally inspect or repair the tank, remove it from service, or reduce its operating conditions before the rupture.
The environmental investigation also identified contamination associated with the release, including impacts on drainage and wastewater systems. The state reported that white liquor reached the Columbia River and a nearby ditch, resulting in fish mortality.
Company disputes findings
Nippon Dynawave said it is reviewing the state findings and disputes the characterization of its actions as "egregious and willful serious", arguing that the report does not include important facts and context regarding actions taken by the company and the timeline leading up to the incident.
The company intends to address the findings through the appropriate appeals process. It is also reviewing the Department of Ecology's penalties and anticipated cost recovery request.
In its November 20 update, Nippon Dynawave reiterated that the workplace safety findings do not establish the root cause of the tank failure, which remains under investigation.
The company said contractors have been dismantling G-tank since early August, with tank sections and components being documented and preserved for forensic examination. Deconstruction is expected to be completed in December 2026, while further technical examination and laboratory testing are expected to continue through the first quarter of 2027.
Investigation continues
The CSB's investigation is examining the tank failure, mechanical integrity, inspection and repair decisions, and the circumstances surrounding the incident. Its final report is anticipated in spring 2027, although the investigation remains ongoing.
Separately, L&I's findings give Nippon Dynawave 15 working days from receipt of the citations to appeal the workplace safety violations and penalties. The state's referral for potential criminal prosecution does not mean criminal charges have been filed.
The company has also been working on recovery and a phased resumption of operations, with a December restart target previously indicated for certain activities using externally sourced pulp and base paper. The timing and extent of a return to normal mill production remain to be established.